jags midwest diesel challenge june 26-27th brainerd, MN

I want to come pull but cant find what classes they have. Anybody know for sure?

Here is what's posted

Pullin Rules for BIR event - Midwest Diesel Connection

JAGS MIDWEST DIESEL SHOOTOUT TRUCK PULLIN CLASSES AND RULES.

Rules that apply to all classes
26" hitch height
3" opening d-ring/Cleves or equal
Dot tires
Drivers are NOT allowed to consume any alcohol before competing. If you are caught you will NOT compete and you will NOT get your hook fee back.
Class jumping is allowed as long as you fit the rules.
8500lbs weight limit for all classes
No passengers allowed in truck while competing.
Trucks that go passed the three hundred foot mark will have a pull off to determine place.




STOCK TURBO CLASS.
Truck must be equipped with stock turbo.
Exhaust must exit reward of the cab.
Not allowed to hang weights.
Rear suspension must move up and down minimum of 2"
No Traction bars.
Diesel fuel only.


2.6 TURBO CLASS
Turbo inlet must not exceed 2.6"
Weight must not exceed 62" from the center line of front axle.
Exhaust must exit reward of the cab.
2 3/8 bolts crossed behind turbo in down pipe within 4" of turbo or exhaust must be pointed upward.
Rear suspension is allowed to be blocked solid.
All showing u-joints must be covered.
Traction bars allowed.
Diesel fuel only.



2.8 TURBO CLASS
Turbo inlet must not exceed 2.8"
Weights must not exceed 62" from the center line of front axle.
Exhaust must be pointed upward and behind cab.
Rear suspension can be blocked solid.
All showing u-joints must be covered.
Traction bars allowed.
Diesel fuel only.


OPEN CLASS.
No turbo size limit.
Multiple turbos allowed.
Hood stacks allowed.
Exhaust must be pointed upward.
Any and all injections are allowed.
Weight must not exceed 62" from center line of front axle.
All showing u-joints must be covered.
Rear suspension can be blocked solid.
 
thanks for posting dave. I was just about to when I saw you did exactly what I was going to do..
 
Back
Top