Here is my question, I searched all the threads and still came across nothing. Back to the question, What is a good rule for length? I have a reg cab and the rear axle supports are welded to the axle and front support is right before the "dip" in the frame where it goes under the cab. Should they be longer than that as in under the cab "dip" in the frame closer to the skid plate support or trans crossmember? I know you can get them to long. Thanks for the input. The reason for this thread is where they are now, the frame is bent "pushed up" the bottom of the frame.
Ladder Bars
- Thread starter cumins01
- Start date
