Lb7_Katie
New member
- Joined
- Jul 3, 2013
- Messages
- 184
1033hp Lb7 Duramax
$40k OBO
ECSB SLT
Engine has less than 2k miles
Truck has 215k (roughly)
tan leather interior no rips
Or tears normal wear and tear on drivers seat back seat is pretty much brand new.
(Don't have the bolts for the seat tho lost them when I moved)
Black Carpet
Bose sound system
Indash radio
Spray in Bed Liner
Truck was repainted 2years ago
No rust/clean underneath
I have an extra front valance the one of the truck has some stone chips.
I have an extra hydro dipped GMC emblem
(The one in the truck is white and silver the extra is black and white)
2 sets of wheels and tires
20x10 BMF Rehabs on the truck with 305/50 toyo proxy (less than 700miles on tires
16x10 with et streets brand new mounted on rims but zero miles on them.
engine built by Wehrli a Custom Fab
Tuned by Duramax Tuner
Specs;
Socal Girdle Kit
Carrillo Rods
Fingers Oval Cast mahle Pistons 16.5:1 Ratio, .020 with valve reliefs
New GM Oil Pump
New GM Oil Cooler
Comp cams Valve springs and Retainers
Ported Heads, 5 angle Valve Job, New Seals and Guides
Screw In Injector Cups
New Exergy 150% injectors
Air dog 4G
DRP Fuel Sump
Socal Billet Injector Hold Downs
Socal 9100 AF Cam
ARP Headstuds
ARP Rocker arm bolt
SoCal Damper
Suncoast Billet Flexplate
ARP flexplate Bolt Kit
PPE manifolds
PPE Intercooler
WCFAB 2" stainless Up pipes
Merchant Motor Mounts
Dual CP3's
pushrods
WCFAB compound kit
(S591 over Duramax Tuner stealth 64.5)
Oldskoolfab Carbon Fiber Stack
Can provide full engine build sheet
Gauges;
All Isspro gauges Black face white backlight
Pyro, 2 boost gauges, fuel rail pressure and I have a brand new trans temp gauge.
Also a digital DSP5 gauge from BT DieselWorks
Trans;
Built by Merchant Automotive
Suncoast GMAX5 clutches
Billet Input shaft
Billet Output shaft
Billet Flexplate
Billet c2 hub
DRPA Upgraded tranlines
Etc...can provide full trans build sheet
Suspension/Front end
Lowered 3" (beltech drop shackles)
Rancho 9000 shocks
Merchant Tie rod sleeves
PPE straight center link
Flight Fabrication Traction Bars
Sent from my iPhone using Tapatalk
$40k OBO
ECSB SLT
Engine has less than 2k miles
Truck has 215k (roughly)
tan leather interior no rips
Or tears normal wear and tear on drivers seat back seat is pretty much brand new.
(Don't have the bolts for the seat tho lost them when I moved)
Black Carpet
Bose sound system
Indash radio
Spray in Bed Liner
Truck was repainted 2years ago
No rust/clean underneath
I have an extra front valance the one of the truck has some stone chips.
I have an extra hydro dipped GMC emblem
(The one in the truck is white and silver the extra is black and white)
2 sets of wheels and tires
20x10 BMF Rehabs on the truck with 305/50 toyo proxy (less than 700miles on tires
16x10 with et streets brand new mounted on rims but zero miles on them.
engine built by Wehrli a Custom Fab
Tuned by Duramax Tuner
Specs;
Socal Girdle Kit
Carrillo Rods
Fingers Oval Cast mahle Pistons 16.5:1 Ratio, .020 with valve reliefs
New GM Oil Pump
New GM Oil Cooler
Comp cams Valve springs and Retainers
Ported Heads, 5 angle Valve Job, New Seals and Guides
Screw In Injector Cups
New Exergy 150% injectors
Air dog 4G
DRP Fuel Sump
Socal Billet Injector Hold Downs
Socal 9100 AF Cam
ARP Headstuds
ARP Rocker arm bolt
SoCal Damper
Suncoast Billet Flexplate
ARP flexplate Bolt Kit
PPE manifolds
PPE Intercooler
WCFAB 2" stainless Up pipes
Merchant Motor Mounts
Dual CP3's
pushrods
WCFAB compound kit
(S591 over Duramax Tuner stealth 64.5)
Oldskoolfab Carbon Fiber Stack
Can provide full engine build sheet
Gauges;
All Isspro gauges Black face white backlight
Pyro, 2 boost gauges, fuel rail pressure and I have a brand new trans temp gauge.
Also a digital DSP5 gauge from BT DieselWorks
Trans;
Built by Merchant Automotive
Suncoast GMAX5 clutches
Billet Input shaft
Billet Output shaft
Billet Flexplate
Billet c2 hub
DRPA Upgraded tranlines
Etc...can provide full trans build sheet
Suspension/Front end
Lowered 3" (beltech drop shackles)
Rancho 9000 shocks
Merchant Tie rod sleeves
PPE straight center link
Flight Fabrication Traction Bars
Sent from my iPhone using Tapatalk
