LMM engine part out

0

02Dmaxdually

New member
Joined
Jul 6, 2013
Messages
109
I have a LMM (2009) engine I'm parting out. Engine was running good, had 155k, EGR cooler went bad. All prices are plus shipping and paypal fees

-Core Injectors $700 (selling as cores)
-Turbo with vane sensor and actuator $375
-Complete heads with rockers assemblies $650
-Valve covers $125
-Fuel Rails $125
-Intake runners and y-bride $125
-Fan clutch hub-$65
-Crank $150
-Cam $80
-Rods $125
-CP3 $425
-Oil pick up $60
-Oil fill tube $20
-Injector feed lines $80
-Wiring harness $175
-Intake $125
-Thermostat crossover $125
-Crankshaft position sensor $45
-Camshaft position sensor $45
-Rear cover $150
-Front cover $80
-Accessory bracket $50
-Balancer $55
-Water pump with housing $75
-Oil cooler assembly with adapter $175
-Fuel filter housing $45
-Upper oil pan $80
-Lower oil pan $50



This is a complete engine so I might be missing some stuff. I tried to keep the prices low but if you feel something is too high PM me and maybe we can work a deal. I want this stuff to sell fast. Engine is still assembled. Will tear down as parts are sold.
 
Injectors, block, crank, lower oil pan sold.

Offers on the other stuff? Need these parts gone
 
-Turbo with vane sensor and actuator $250
-Complete heads with rockers assemblies $550
-Valve covers (all 4) $100
-Fuel Rails $100
-Intake runners $40
-Fan clutch hub-$50
-Cam $80
-Rods $150
-Oil pick up $40
-Oil fill tube $10
-Injector feed lines $80
-Wiring harness $120
-Thermostat crossover with thermostat housing $120
-Crankshaft position sensor $20
-Camshaft position sensor $20
-Rear cover $120
-Front cover $80
-Accessory bracket $50
-Balancer $55
-Oil cooler assembly with adapter $175
-Fuel filter housing $45
-Upper oil pan $80
-Oil pump with gear $75
-Injector return lines $30
-Cam gear $30
-Crank gear $30
-Injector hold downs with bolts $30
-Passenger side exhaust manifold $30
-Throttle body assembly with piping $75
-Oil pressure switch $25
-cam bolt and retainer with bolts $25
-All pushrods $30
-flywheel with bolts $50
-Fuel filter housing (heater wire was cut) $35


all parts had 155k on them.

All prices plus shipping and paypal fees
 
-Turbo with vane sensor and actuator $250
-Complete heads with rockers assemblies $550
-Valve covers (all 4) $100
-Fuel Rails $100
-Intake runners $40
-Fan clutch hub-$50
-Cam $80
-Rods $150
-Oil pick up $40
-Oil fill tube $10
-Injector feed lines $80
-Wiring harness $120
-Thermostat crossover with thermostat housing $120
-Crankshaft position sensor $20
-Camshaft position sensor $20
-Rear cover $100
-Front cover $80
-Accessory bracket $50
-Balancer $55
-Fuel filter housing $45
-Upper oil pan $80
-Oil pump with gear $75
-Injector return lines $30
-Cam gear $30
-Crank gear $30
-Injector hold downs with bolts $30
-Passenger side exhaust manifold $30
-Throttle body assembly with piping $75
-cam bolt and retainer with bolts $25
-All pushrods $30
-flywheel with bolts $50
-Fuel filter housing (heater wire was cut) $35


all parts had 155k on them.

All prices plus shipping and paypal fees
 
Lower prices, Need this stuff gone.

-Turbo with vane sensor and actuator $200
-Complete heads with rockers assemblies $450
-Valve covers (all 4) $75
-Intake runners $30
-Fan clutch hub-$45
-Cam $60
-Oil pick up $40
-Oil fill tube $10
-Injector feed lines $80
-Thermostat crossover with thermostat housing $65
-Crankshaft position sensor $15
-Camshaft position sensor $15
-Rear cover $80
-Front cover $50
-Accessory bracket $25
-Balancer $45
-Upper oil pan $60
-Oil pump with gear $75
-Cam gear $15
-Crank gear $15
-Injector hold downs with bolts $30
-Passenger side exhaust manifold $15
-intake pipe with throttle body $55
-cam bolt and retainer with bolts $20
-All pushrods $30
-flywheel with bolts $40
-Fuel filter housing (heater wire was cut) $35


all parts had 155k on them.

All prices plus shipping and paypal fees
__________________
 
parts that are left

-Turbo with vane sensor and actuator $200
-Valve covers (all 4) $75
-Cam $60
-Oil pick up $40
-Crankshaft position sensor $15
-Camshaft position sensor $15
-Rear cover $80
-Front cover $50
-Balancer $45
-Upper oil pan $60
-Oil pump with gear $75
-Cam gear $15
-Crank gear $15
-Injector hold downs with bolts $30
-intake pipe with throttle body $55
-All pushrods $30
-flywheel $40
-Fuel filter housing (heater wire was cut) $35
-Misc fuel lines


all parts had 155k on them.

All prices plus shipping and paypal fees
 
lower prices. Only have the parts listed



LMM-All parts had 155k

-Turbo with vane sensor and actuator $125
-Valve covers (all 4) $45
-Crankshaft position sensor $5
-Camshaft position sensor $5
-Balancer $30
-Oil pump with gear $30
-Upper radiator hard pipe $20
-Cam gear $5
-Crank gear $5
-Injector hold downs with bolts $5
-Intake pipe with throttle body and grid heater (grid heater plastic got cracked) $10
-cam retainer with bolts $5
-flywheel/flexplate $25
-Fuel filter housing (heater wire was cut) $30
-Cam $30
-(8) stock pistons with wrist pins and clips $40
-Misc fuel lines $30
 
You must log in or register to reply here.
Back
Top