Locking in front end

S

snyder

New member
Joined
Apr 8, 2013
Messages
26
I'm interested in locking the 4wd in my front end in my 98 24valve cummins 3500 (dually) with the nv4500(5spd with 4.10s)...I have friends that welded theirs but I don't really want to weld due to the fact that I do run my truck on the road very rarely...I have heard of a way to do this with a system of cables where you can lock it in or have it unlocked...is this even a good idea at all?...suggestions or ideas would be appreciated thanks guys
 
You have to put a locker in the front like a Detroit or right lock locker and they make an aftermarket cable system to lock in the passenger side axle. Look up posi-lok 4x4. No welding needed.
 
Yukon Grizzley locker. 4 or 5 hundo from Haisleys. Its awesome.
 
If the passenger side has the disconnect then you can make your own with a bike brake cable and trip to lowes. I have a write up for a Jeep if you want to see the basics.
 
You must log in or register to reply here.
Back
Top