Lookin for 450HP or more

D

Diesel Freak

Active member
Joined
Jun 20, 2007
Messages
1,163
Yeah, sig says 577, but I want over 450 with just an EZ.

So, what sticks? have heard M7's from Donny, what are my other options?

Scheid 6x12?

Something else?

Truck currently makes 411 with the EZ.
 
What are your other mods? Not sure about the 6x12's, but I tried some of Scheid's 7x12's and they were awesome.
 
Diesel Freak said:
Yeah, sig says 577, but I want over 450 with just an EZ.

So, what sticks? have heard M7's from Donny, what are my other options?

Scheid 6x12?

Something else?

Truck currently makes 411 with the EZ.
Click to expand...


6's and a silver bullet without wire tap did 501 and 9xx.

7's should be around the same or a lil more, depending on air.
 
HX40/GT42-02 twins, both externally wastgated. makes 54 psi of boost, more if I need it.

38mm gate on top, 50mm on bottom.

Fass HPFP150 pump, SO VP44 with a HO ECM. Mach 5.8 injectors. Helix II cam and some mild head porting, +.020 head gasket.

Edge EZ stacked with an old three wire Blue Chip race box.
 
Diesel Freak said:
HX40/GT42-02 twins, both externally wastgated. makes 54 psi of boost, more if I need it.

38mm gate on top, 50mm on bottom.

Fass HPFP150 pump, SO VP44 with a HO ECM. Mach 5.8 injectors. Helix II cam and some mild head porting, +.020 head gasket.

Edge EZ stacked with an old three wire Blue Chip race box.
Click to expand...


you should be over 450 with ez and 5.8's. what are you at?
 
My truck made 492 hp with mach 4's, a smarty, and a hrvp from II.
 
You must log in or register to reply here.
Back
Top