takedown95
New member
- Joined
- Aug 18, 2011
- Messages
- 2,841
I have a sheet metal SQHD rear end with f106 spindles.
The hubs have a seal race diameter of 4.73" and the spindle has a seal surface diameter of ~4"
So I'm look for a seal with an O.D. of 4.75" and an I.D. of 3.8-3.9"
The spindle seal diameter seems to be an oddball diameter. I could turn the hubs to accept the 4.85 O.D. seals I have but I would prefer not to if there's a seal out there already.
Anybody have any suggestions?
The hubs have a seal race diameter of 4.73" and the spindle has a seal surface diameter of ~4"
So I'm look for a seal with an O.D. of 4.75" and an I.D. of 3.8-3.9"
The spindle seal diameter seems to be an oddball diameter. I could turn the hubs to accept the 4.85 O.D. seals I have but I would prefer not to if there's a seal out there already.
Anybody have any suggestions?