Low Pressure oil return line?

[95taylor331]

Im wondering where everyone runs their oil return line off their low pressure turbo in a compound kit? when I had compounds I put a T in the high pressure/stock return line, I don't want to drill a hole in the pan though , just seeing if there is any other way

 

[turboman1]

I believe source automotive has drain fitting that you can bunch a hole in the pan and then use a 2 part epoxy to 'weld' it in there. Not the most ideal but it works out well if you don't want to pull the pan off the motor.

Oil Return Bung for 1994-1997 12V (Angled)


Adam