Melting_pistons build thread

Yeah here are a few of my favorites...in advance I just want to let you know, my taste are a little bit of everywhere lol

82f759bac42fd651bdfab8561c620a22.jpg

6da7dcab66fb17e219797d7bc9465a6f.jpg

0ce2f1387b4492ce414eb2f3f44d8dab.jpg

d19cf8747198b13c4c50ae414bafe803.jpg

1595cc1aabd720032363bc8f071a88c1.jpg

92af10079ab5bfd459a804d2605d4462.jpg

94b7e81222acf161864b0fa7a58d7fe4.jpg

3febb479f1977f4cdc04aa59b76bcc98.jpg

1d2c271b8fad68e28134f43681909fe6.jpg



Sent from my iPhone using Tapatalk
 
Empty_Pockets said:
Man your truck looks good. Did you get your surging issue figured out?
Click to expand...


Thanks man!

And Nope. Lol. Driving with normal acceleration I can rarely notice it. It’s when I get over say 25% throttle. But I was just cruising to that show, and I’ve been dying to get it out. This is the first time I’ve taken it out in a year.

I should be done with this regular cab in the next couple of weeks, so then I’ll get back working on mine. I honestly don’t know where to start. I’m going to double check feed tubes, and get a gauge on the lift pump...then go from there.


Sent from my iPhone using Tapatalk
 
I got a surge on my on any tune above 2. Going to switch tuners first cause ive been wanting to anyways. After thst will start narrowing it down. I know my lift pump pressure is fine, feed tubes will be the next thing i check after tuning.
 
I think I have my surge issue figured out. I’ll let y’all know if what I’m thinking fixes it... on another note, any guesses as to what this is going to be??
4715dd5c3cae067da936b1011c2d0d5b.jpg



Sent from my iPhone using Tapatalk
 
Well here is what it was...this is just a test piece. I’m gonna make some that look a tad nicer. But since there is no simple way to move the brake reservoir and there are no cleaner options, I just made a cover for it. ?

54151e1021af13e667c05014bdd80731.jpg

e32d20b91e226a2c7f765d3cb7f157cf.jpg

8933f59fa06a76c4aa7423bb255d931f.jpg



Sent from my iPhone using Tapatalk
 
As for the fueling issue, I’m pretty sure it’s resolved... root cause? I’m an idiot.

So when I bought the truck it had the II dual fueler kit already installed. I noticed the harness wasn’t like for every other dual pump kit I’ve installed, such as the one pictured below...

d447664c265abde025c0081c2600113d.jpg


What I had resembled the picture below... I knew fleece made a dual pump splitter...I had never looked into them, but I was assuming that’s what this was, as it looks nothing like the PPE controller I’m used to.

b3b04df66d92a62eba7e91d2395ebd00.jpg


In reality.... pictured below is a fleece dual pump splitter. The picture above (which I have) is a fleece dual pump controller.

1fc05f26d11bed42f3de30e752faa916.jpg


In the end... I had my tunes written to work with a dual pump splitter, when I in fact have a dual pump controller. This explains I had problems before and after the injector swap.

Now I haven’t driven the truck yet, but the funky idle issue is definitely fixed. I’ll be driving the truck in the next couple of days to verify the surge is resolved, but I’m 99% sure I won’t be seeing any issues.

I feel like an idiot, but at least that’s one thing I have lined out and I can start logging/testing finally.


Sent from my iPhone using Tapatalk
 
I've been curious about the durability of the ecm driver using the splitter rather than the controller.

Sent from my motorola one action using Tapatalk
 
Finally got a chance to drive the truck. Even on tune 1 this thing is rowdy. It feels faster than the old tow rig that ran 7.50...but could just be how hard this big single hits. I am having issues getting it to spool, but Ryan is working with me to try to get it to light. Regardless....I’m ecstatic to hear this thing spool up and scream down the road (in Mexico of course)

69dcafcccac368b49d91e37bccffee89.jpg



Sent from my iPhone using Tapatalk
 
Got the first revision and loaded. Went for a test drive, and this thing drives great. Can street drive it with little to no haze, which I’m super happy about seeing as its a stock head, sbe, 5.9 with a t6 and 250 overs.

With this new file I can get it to spool somewhat. It’s a little temperamental...as one time it will spool, then the next it won’t. All we did was back off of the low boost fueling by 5% and it definitely helped a lot.

I did a log on a 15lb launch (which isn’t enough) on tune 1 and this thing moves out pretty good. Can’t wait to turn it up. I also took some videos/logs to send over to Ryan and we will see what he thinks. I’ll keep this thread updated on how it works out.

f6ea0b965fbaaa7e441bfb03ba2a4755.jpg

1d00d6a0e3c945d79819d4cfc756d4d6.jpg

6d8d535274a1b4ef64f705780b32f3d1.jpg



Sent from my iPhone using Tapatalk
 
well, I haven’t even touched the truck over the last couple of weeks other than messing with these front bumper brackets... but I did snag these new laramie longhorn 20s for a street setup, so that I can get off of these radials. They need a little loving... but here they are.

514a92b684e115a187d6952fa0a89351.jpg



Sent from my iPhone using Tapatalk
 
Those will look good! When are you going to be able to take it to the track? Hopefully before winter time?
 
RMJ_LB7 said:
Those will look good! When are you going to be able to take it to the track? Hopefully before winter time?
Click to expand...


Yea I’m going to mess with it a little this week, then hopefully I’ll get a chance to get to the track within the next month. If nothing else I will have it at diesel truck wars at the end of October.

I’m considering getting a dragy, seeing as I have limited track time for testing. I can do some “Mexico” testing to get it dialed in. I’ve heard they are pretty accurate


Sent from my iPhone using Tapatalk
 
Melting_pistons said:
Yea I’m going to mess with it a little this week, then hopefully I’ll get a chance to get to the track within the next month. If nothing else I will have it at diesel truck wars at the end of October.

I’m considering getting a dragy, seeing as I have limited track time for testing. I can do some “Mexico” testing to get it dialed in. I’ve heard they are pretty accurate


Sent from my iPhone using Tapatalk
Click to expand...

A lot of people I have seen use them say they are only off by a little. would be nice for test hits!
 
So today I did some checking for boost leaks. First issue was leaking out of the threaded holes for the intake horn (bottom of the intake shelf) and out of the top of the threads themselves. So I put some thread sealant on them and let it sit up overnight. Now I’m leaking out of the gasket itself (figures). But I figured what the heck, let’s try to spool it up. So I let the truck run for 15ish minutes, then it spooled right up in around 10 seconds. I let it sit for 30
Minutes or so, and tried again and it spooled right up. That’s the first time I’ve had it repeatedly spool up at will without fighting it. So maybe I got the majority of that issue resolved.

I did notice this tho. I’ve never seen it before. It’s hard to tell in the pics, but this boot is slightly leaking. It’s really small bubbles leaking out of the cordage inside of the boot, not between the boot and pipe itself. It’s not much, and it took 25psi to start to bubble. But still kinda weird. Does this mean the boot is ripped internally?

ccf3aea6e70272d787c82f99c4ea3136.jpg

f8cdb1e90131ed1ad96232823769ee3d.jpg



Sent from my iPhone using Tapatalk
 
Oh... by the way... this came in! I can’t wait to give it a shot. They are supposed to be super accurate. Gonna replace the intake gaskets next week then go give it a shot. “If you can’t take the truck to the track, bring the track to the truck” lol

b528718ef228c0daee218cb34f49f8cb.jpg



Sent from my iPhone using Tapatalk
 
I personally haven't seen that before, but im still green behind the ears lol. I would recommend to v-band it and be done.
 
RMJ_LB7 said:
I personally haven't seen that before, but im still green behind the ears lol. I would recommend to v-band it and be done.
Click to expand...


That’s going to happen whenever I get around to changing the ic lol


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top