modified he351

newsmoke

newsmoke

New member
Joined
Jun 3, 2011
Messages
1,501
I needed to make an he351 with a straight outlet flange for a project so here's some pics
 
u9a9avyt.jpg


ha2a5ene.jpg


aju8eze6.jpg


a7a7ypa8.jpg

Sent from my C811 4G using Tapatalk 2
 
That's all I have for now, ill be working on it again tomorrow

Sent from my C811 4G using Tapatalk 2
 
For sure, anyone have pictures of a fully dressed and stock 351 for reference?
 
Thanks guys, there's a ton of weld in this thing. That's a 2-1/2" v band for anyone who's curious
 
You know it would have been easier to have a hy35 cover machined to the 351 wheel specs and then put that on. Just a fyi.
 
Would it not have been easier to fit and weld a straight pipe on, and flange on the end? I have built up with bead before, an that takes a bit more time and effort.
 
I spent roughly an hour welding, with this particular project appearance is important also. That's why I'm spending the extra time on it
 
crackerman said:
Would it not have been easier to fit and weld a straight pipe on, and flange on the end? I have built up with bead before, an that takes a bit more time and effort.
Click to expand...

If you did that you'd need a decent length of pipe to allow the size reduction. And space is an issue on this setup.
 
You must log in or register to reply here.
Back
Top