TheSilverBullet
All the correction factor
My truck has a pretty notable miss all the way through the rpms. It starts hard and has pretty good white smoke. I keep thinking it’s timing but here’s the list of mods
99 dodge 3500
Stage 4 Farrel 215
Weston 6x13 vco
Fass 150
Colt stg 4 cam
078 lines 120 cross overs
Eat soot timing gear.
63 sxe over s475
I originally bought truck with a cracked block. I replaced with a 55 new rings bearings and had the block checked. The injectors pop off were out of wack and had Weston freshen them up at that time it had a 7x11
Truck ran decent but I always thought it had a miss at low rpm at hazed pretty good. Also hard starting. Well it seemed to get worse last fall. At this time I’ve drove it about 6k miles. So I checked the timing which is keyed right on 20. I went through cracking lines loose and I found #1 to be the problem. Switched it to #3 and it seemed to follow it. So I sent the injectors back to Weston to have him check them everything seemed fine. Well I found my secondary housing cracked so I decided to upgrade to a 6x13 and a 63sxe.
The original conversion was done at 130k by a good friend.
At 141k I bought it with a cracked 53
It’s currently at 149k with 100 miles on the injectors.
I’ve went over valve lash and timing 3 times. Everything seems good. I bumped the timing to 24 with no real difference. Shutdown key is in and working probably. I’ve tightened the ofv up from 40 psi idling all the way to 55 psi.
The truck has heavy white smoke and an almost pop out the exhaust if you hold the brake and spool it. Definitely miss and shake all the way through the rpms. Also it gets hot quick 900 cruising and get into it makes 80 psi and pegs the 1600 with hardly any black smoke till the upper end.
Really seems like timing to but I’d think if I was close it wouldn’t be terrible like this. Just really seems like fuel but from internal pump work I think I’ve covered everything pretty well. Thanks for any input
99 dodge 3500
Stage 4 Farrel 215
Weston 6x13 vco
Fass 150
Colt stg 4 cam
078 lines 120 cross overs
Eat soot timing gear.
63 sxe over s475
I originally bought truck with a cracked block. I replaced with a 55 new rings bearings and had the block checked. The injectors pop off were out of wack and had Weston freshen them up at that time it had a 7x11
Truck ran decent but I always thought it had a miss at low rpm at hazed pretty good. Also hard starting. Well it seemed to get worse last fall. At this time I’ve drove it about 6k miles. So I checked the timing which is keyed right on 20. I went through cracking lines loose and I found #1 to be the problem. Switched it to #3 and it seemed to follow it. So I sent the injectors back to Weston to have him check them everything seemed fine. Well I found my secondary housing cracked so I decided to upgrade to a 6x13 and a 63sxe.
The original conversion was done at 130k by a good friend.
At 141k I bought it with a cracked 53
It’s currently at 149k with 100 miles on the injectors.
I’ve went over valve lash and timing 3 times. Everything seems good. I bumped the timing to 24 with no real difference. Shutdown key is in and working probably. I’ve tightened the ofv up from 40 psi idling all the way to 55 psi.
The truck has heavy white smoke and an almost pop out the exhaust if you hold the brake and spool it. Definitely miss and shake all the way through the rpms. Also it gets hot quick 900 cruising and get into it makes 80 psi and pegs the 1600 with hardly any black smoke till the upper end.
Really seems like timing to but I’d think if I was close it wouldn’t be terrible like this. Just really seems like fuel but from internal pump work I think I’ve covered everything pretty well. Thanks for any input