J.Keith
Pro Diesel Tech
- Joined
- Feb 14, 2007
- Messages
- 708
05 CR in a superduty
Engine cranks, talks to the DRBIII, been through the wiring backwards and forwards and it still won't fire
DRB shows 21k + psi of RP while cranking, hardline gauge confirms this.
ECM was treated to a Recovery File (Thanks again Bob!) Still no go
The most prominent problem that I can see is when the engine is being cranked the final fuel state goes from "Engine off " to " Shutdown" Why?
Only code that I have thats not related to the motor being in the Ford is a J1850 Short to Ground. Can't find it yet.
Thanks guys!
Jeremy
Engine cranks, talks to the DRBIII, been through the wiring backwards and forwards and it still won't fire
DRB shows 21k + psi of RP while cranking, hardline gauge confirms this.
ECM was treated to a Recovery File (Thanks again Bob!) Still no go
The most prominent problem that I can see is when the engine is being cranked the final fuel state goes from "Engine off " to " Shutdown" Why?
Only code that I have thats not related to the motor being in the Ford is a J1850 Short to Ground. Can't find it yet.
Thanks guys!
Jeremy