pickup in fuel tank

D

diesel67

New member
Joined
Jun 30, 2013
Messages
4
I'm doing the fummins build as i see a lot of people are doing. I'm putting a 12v in a 97 F350 that had a ps. I have the original tank out of the truck but no pick up lines or anything in it. I'm pretty sure that originally they had the pump in the tank attached to the pickup lines and sending unit. I'm putting in a fass system so i don't need the pump in the tank. I though i would just find an old sending unit and take off the pump but can't seem to locate one. Long story short what are you guys doing for this part of the build? any ideas would be great. thanks
 
I installed a Beans fuel sump kit in my tank for the feed line. Then gutted the sending unit and slipped on the return line from the cummins. The original feed line on the sending unit I just plugged off. If you don't have the sending unit, any junk yard should have them
 
ok thanks I've seen a few people have done the sump kit and was thinking of doing that. Sounds like that would e be the way to go. thanks
 
You must log in or register to reply here.
Back
Top