Re-Routing Some Coolant Hoses

[EverydayDiesel]

I am removing the factory vgt and replacing with oil cooled turbos. Would this be ok as far as cooling goes? (I also have a fleece coolant bypass)

I would like to put a shutoff valve on the green and blue hoses to keep the coolant from entering the cab in the summer time.

Thanks in advance

 

[dangerous06]

Yes it's fine for cooling most are! I used a 5.9 Lower radiator hose mount and piping from a manual trans to replace the 6.7 crap. One valve on the supply pipe should stop the flow thru the heater core but two if you want. You can use a block plug with oring from a 5.9 to block the coolant line on the pass side hopefully you did that before placing the manifold!