CoalRoller01 Addicted Joined Jun 11, 2009 Messages 186 Nov 18, 2009 #1 I have a blown Hx35. Wondering where I can find a full rebuild kit for it and maybe instructions or diagrams. It is my first time attempting to rebuild a turbo. Any help would be great.
I have a blown Hx35. Wondering where I can find a full rebuild kit for it and maybe instructions or diagrams. It is my first time attempting to rebuild a turbo. Any help would be great.
Clunk New member Joined Dec 6, 2008 Messages 249 Nov 19, 2009 #2 The Holset site must be down for repairs right now but there's a free downloadable service manual for the HX35 there with specs. http://www.holset.co.uk/ I see repair kits on eBay every now & then. I send my turbos to a local guy here...I'm not set up for balancing and I spin mine pretty hard.
The Holset site must be down for repairs right now but there's a free downloadable service manual for the HX35 there with specs. http://www.holset.co.uk/ I see repair kits on eBay every now & then. I send my turbos to a local guy here...I'm not set up for balancing and I spin mine pretty hard.
12vriviera That Guy with that car Joined Mar 31, 2009 Messages 6,846 Nov 19, 2009 #3 ebay for kit... 60 bucks
Clunk New member Joined Dec 6, 2008 Messages 249 Nov 22, 2009 #4 Here download this, I had to allow pop-ups for it to download. www.cummins.com/turbos - service repair manuals Download these reference sheets for clearance, endplay & runout specs, www.cummins.com/turbos - reference sheets Pay particular attention to the oil ring groove spec and shaft diameter(s) spec on the turbine shaft, you can check them with some good dial calipers. Last edited: Nov 22, 2009
Here download this, I had to allow pop-ups for it to download. www.cummins.com/turbos - service repair manuals Download these reference sheets for clearance, endplay & runout specs, www.cummins.com/turbos - reference sheets Pay particular attention to the oil ring groove spec and shaft diameter(s) spec on the turbine shaft, you can check them with some good dial calipers.