I have seen many threads where people have there pumps built and benched and say that they flow such and such cc's of fuel. There are rules of thumb about how much horsepower one can make with a cc of fuel so 500cc of fuel and whammoo 1000 hp. But what about the injectors, obviously not every injector is capable of flowing 500cc of fuel so what are the rules of thumb for injectors per cc.
example
a good set of 5 x .012 will not be a restriction until around 300cc of fuel.
Of course i have no idea if that is accurate but you get the picture, also i read a lot about pintle lift an pop off pressures how do these relate to power production. I know that the injector is a very important piece of the power making puzzle just trying to get a solid grasp of it all.
example
a good set of 5 x .012 will not be a restriction until around 300cc of fuel.
Of course i have no idea if that is accurate but you get the picture, also i read a lot about pintle lift an pop off pressures how do these relate to power production. I know that the injector is a very important piece of the power making puzzle just trying to get a solid grasp of it all.