s300 ex. housing

1stgencummins17

just a sled puller
Joined
Jun 18, 2008
Messages
183
i got this s300 tht my brother gave me it has a i think but not exact an 1.15 ar thts wats stamped on the housing its a 62/75 is what he told me. would this spool well with 6x.018? an were could i get a tighter exhaust housing for it if its possible?

sorry dont know much about chargers.
 
I figured so it did wen my brother had it on his truck. Is it possible to get a tighter housing for it.
 
HOLD ON ---

Not sure what size a 1.15 AR crosses to - guessing about 18cm since I read a .90 is close to 14cm.
Since you've got a 518 - even with your specrite TC - the engine will wind up faster than a stick.

My 17cm HX40 with an HX50 turbine ( the flange opening is larger than the stock T3 ) spools plenty quick..
Taking off at a stop light I can easily hit 20psi if I don't watch the throttle, and at road speed the small movements of the CC can make my boost gauge jump 3 - 4 psi - - - and that's with my valet switch active. If I let the boost thru to the AFC and get more fuel the boost wil skyrocket.
 
Last edited:
so wat ur saying unixcowboy is it should spool pretty well?
ill just throw it on an try it then like fatty said if it dont work call sum ppl.
 
Back
Top