S400 2.6 exhaust housing

R

Rich dzl

12v guru
Joined
Mar 20, 2011
Messages
741
What is the best exhaust housing and turbine combo for a s475 ... Running a t4 1.10 83mm turbine can't stay on top tired a .90 runs 70 psi.. When rpm below 3300 falls under
 
Way too many variables.

I ran a 3x3 with a 2.8 bushing for a few years with the .90 housing. My truck loved that turbo. Above 4000 rpm drive pressure was high. Would fall off the turbo around 2800.
 
I have a T6 .80 for the 74x83 wheel. Brand new never ran.
 
A lot more to it then just what exh housing your running. Drop in cam?
 
I have a S475/96 1.00 T4 housing i got to stay above 4k to keep it alive. Im also running a dead old 7.3 :poke:
 
Air to water?

What motor is it on. Give some detail

from phone
 
Last edited:
You must log in or register to reply here.
Back
Top