s475 over s595 on common rail

[torqueslut]

anyone have any pics on a truck im about to start this next week

 

[WUnderwood]

search for jepling, he is running the same twins, I believe

 

[ctdiesel99]

 

[smokin1997]

I believe Trent Nell from Salt Lake did a set or something similar on a cr. it looked cool, but the only time I seen it it needed a bit more tuning

 

[torquemondster]

holy chit, What cover is that on the 475...

 

[2007 5.9]

holy chit, What cover is that on the 475...

That's the 595 in the foreground. His twins are similar setup as the first generation 24v twins, secondary on the theoretical bottom and primary out in front.

 

[CalebZ400]

holy chit u planning on racing the space shuttle lol

 

[not enoughsmoke]

Jepling want to sell his

 

[murphy41]

I believe Trent Nell from Salt Lake did a set or something similar on a cr. it looked cool, but the only time I seen it it needed a bit more tuning

yes, it was a 472 over a 595 based 100mm on the Dodge CR, his Dmax has a 475/100mm from Gillete Diesel

 

[Mr.T]

holy sh!t those are some big twins

 

[dmaxexpress]

what kind of boost numbers are u seeing with these chargers

 

[TMONEYDIESEL]

what kind of boost numbers are u seeing with these chargers

:hehe:

 

[THEREAPER]

slut you going to run the 1/4 finally or just continue running the 1/8

 

[not enoughsmoke]

what kind of boost numbers are u seeing with these chargers

On jeplings setup u could hit a 100psi no problem tuner or not. It amazed me that it spooled quicker than his old setup.The only problem is when he would try to load it on the dyno u couldnt load it up past 80psi.

 

[torqueslut]

slut you going to run the 1/4 finally or just continue running the 1/8

i finally put 3.42's in and once i run a 6.40 im goin to the 1/4

 

[not enoughsmoke]

 

[shiftycapone]

Smooth bore on the secondary? What kind of cover?

 

[03f3507.3]

I ran an 71mm billet super phatshaft over an S595 for awhile on my common rail was one rowdy set up!

here are some crummy pics before i built an intake...

 

[torqueslut]

^^^

looks kinda like mine how does not having an intercooler affect it, egt's?

 

[not enoughsmoke]

Smooth bore on the secondary? What kind of cover?

thats a s300 front cover with a s400 center section