spool

[Roger Zeedyk]

Does anyone know where I can buy a spool for a 32 spline dana 60 out of a 02 Dodge 3/4 ton? Thanks

 

[bailey]

randy's ring and pinion

 

[Jess@FarmboyFab]

:welcome:



i was hoping that was the one i have in my showroom...but its a 35spline, must be for an old ford d60

 

[Roger Zeedyk]

randy's ring and pinion

Already tried , No luck
Thanks though

 

[Jess@FarmboyFab]

i only have 30, 35, and 40 spline listed.

 

[Roger Zeedyk]

i only have 30, 35, and 40 spline listed.

Thanks I think the32 spline was only made in 2002. I guess it is time to get the welder out!

 

[getblown5.9]

never heard of 32 spline...i have an 02...that might suck if i cant get parts for my 60

 

[zstroken]

2000-02 have 32 spline. Go look at ARB site.

 

[BenM]

splines

i have a 02 and just went through the front axle with 4.88 detroit locker and the 35spline stage II dynatrac and the shafts were 30's not 32's. was it a 02 non-cad thing?

 

[zstroken]

Measure the shaft, I know of an 01 and an 00 that had the 32 splines. It could depend on what your counting as the spline also.

 

[Roger Zeedyk]

Are the 32's stronger than the 30's? At what HP level does a guy need to go to the 35 splines?

 

[touch racing]

Roger give me a call, I will weld your stock diff.