DuraDan
Diesel Monkey
- Joined
- Nov 9, 2009
- Messages
- 485
I am currently experiencing axle wrap at the starting line when I launch... I have come to the conclusion that since I have added 80+ hp I should make some traction bars... Im looking at two different style's and need help choosing.
Option 1: I see where some people install the bars at the bottom of the axle/spring to the bellcrank on a pivot point...
Option 2: I also see where they install the bars at the bottom of the axle/spring and go further forward and weld the mounting brackets to the frame.
Seems like "option 1" would be a better choice for me. How I see it a pivot point would work better cause then you would keep your suspension travel when street driving, but would also help at the track. Where as "Option 2" the bars are stationary and would not allow the axle to go up and down. Correct me if im wrong. Thanks
Option 1: I see where some people install the bars at the bottom of the axle/spring to the bellcrank on a pivot point...
Option 2: I also see where they install the bars at the bottom of the axle/spring and go further forward and weld the mounting brackets to the frame.
Seems like "option 1" would be a better choice for me. How I see it a pivot point would work better cause then you would keep your suspension travel when street driving, but would also help at the track. Where as "Option 2" the bars are stationary and would not allow the axle to go up and down. Correct me if im wrong. Thanks