Big Swole
MegaInterceptor
Thought I'd share since this would be just about my dream street / strip truck. Rich from Dog House Diesel has had this truck as a work in progress for many years now, but he's recently decide to take a serious leap in progress. Building a set of triples and a customer header to replace his old LARGE single and nitrous set up.
I'll be posting from his thread " The Build Up" on another forum. I ask his permission to share bits and pieces of his build. The whole thread is amazing, but I'll just post most of the newest progress.
His old build netted around 1500 whp and has run a 6.38 in the 1/8 to this point. I'll hit on just a bit of his old setup.
Here is a vid of him taking the track manager for a ride. Street tires so he figured he'd just have a little fun with the guy.
http://www.youtube.com/watch?v=YOpv96EBJ_A?list=PLid5ulDLnH-daxCgLkW7tKV6bffxerc9-
I'll be posting from his thread " The Build Up" on another forum. I ask his permission to share bits and pieces of his build. The whole thread is amazing, but I'll just post most of the newest progress.
His old build netted around 1500 whp and has run a 6.38 in the 1/8 to this point. I'll hit on just a bit of his old setup.
Here is a vid of him taking the track manager for a ride. Street tires so he figured he'd just have a little fun with the guy.
http://www.youtube.com/watch?v=YOpv96EBJ_A?list=PLid5ulDLnH-daxCgLkW7tKV6bffxerc9-
Made a few more passes today. Truck did decent. Spun at about mid-track on 2 consecutive passes, but not too shaby...speed was off a bit from the little bit of spin, but only 3-4 mph from usual.
Sorry about the picture quality, I'm pulling these from folks videos....
She gets a little squirrelly when the second kit comes on. lol
Out with the old.....
In with the new.....
This is just a temporary piece to bolt the turbos to the engine to make brackets and mock-up the piping....