TX: 24V engine part out - 10 engines

[undrpsi]

Complete Part out of 10 running engines, all 53 blocks.

Pumps, injectors and most turbos are gone. Bulk deals are welcome. I can assist with shipping / freight. I have fork lift access and freight accounts set up for pretty inexpensive LTL.

Pistons: $10
Rods: $30
Camshafts: $100
Blocks: $150 (none of these are cracked from what I can tell, all came from running busses, good for sleds?)
Crankshafts: $150
Heads: $250
Oil Pans: $80
Allison AT545 Adapter Plates: $75

Smaller parts available. PM any questions.

 

[Chrisd91]

How many Pistons would fit in a large flat rate box? What diameter bowl?

 

[Chrisd91]

Also, have any front oil fill valvecovers?

 

[undrpsi]

Also, have any front oil fill valvecovers?

Chris - sorry for the delay - out of town for the holiday weekend. I'll check tomorrow and send you a PM on both requests.

 

[bigstacks95]

Do you have an HX35 from a non Dodge application?

 

[undrpsi]

Do you have an HX35 from a non Dodge application?

Yes - I should have at least 5-10 of them. You need something that is good / rebuildable or ready to bolt on?

 

[TheSilverBullet]

Do any of the blocks have the hole for a crank sensor by the dipstick tube and are non 53? Thanks

 

[Cummins6.7trip]

Is $30 for a set of rods or individual.

 

[undrpsi]

Do any of the blocks have the hole for a crank sensor by the dipstick tube and are non 53? Thanks

All of these blocks are 53's.....LMK if you're still interested and I can check on the crank sensor hole.

 

[undrpsi]

Is $30 for a set of rods or individual.

It was individual - but I am open to offers on the rods. Shoot me a PM and I'm confident we'll work something out.

 

[bigstacks95]

Yes - I should have at least 5-10 of them. You need something that is good / rebuildable or ready to bolt on?

Sending a PM