Pony_Kegger
New member
- Joined
- Jul 16, 2009
- Messages
- 369
New in box sintered iron clutch triple weighted. Clutch, Throw out bearing, Throw out arm, flywheel bolts. 2000+Shipping For Cummins Can text pics if you like.
Also have a Fresh 24 valve head. No run time
Cut intake and drilled for zz bolt pattern
Will have top load replacement shelf included and bolted on
24 New Valve guides
12 new Exhaust valves
Old exhaust valves used in intake side
Both intake and exhaust valves cut to 45 degrees.
Fresh valve job
Head had induction hardened seats
replaced induction hardened seats in exhaust with press in one because of cracking
Cut seats in intake for 45 degrees
110 lbs springs
Fresh deck
New seals
Light porting on bowls and intake side
2500+ shipping
Also have a Fresh 24 valve head. No run time
Cut intake and drilled for zz bolt pattern
Will have top load replacement shelf included and bolted on
24 New Valve guides
12 new Exhaust valves
Old exhaust valves used in intake side
Both intake and exhaust valves cut to 45 degrees.
Fresh valve job
Head had induction hardened seats
replaced induction hardened seats in exhaust with press in one because of cracking
Cut seats in intake for 45 degrees
110 lbs springs
Fresh deck
New seals
Light porting on bowls and intake side
2500+ shipping