Wastegate actuators, Bullseye vs. ED

bh10

bh10

Web Wrencher
Joined
Feb 14, 2008
Messages
1,974
Looking at getting something a different actuator then the boost reference controllers, looking at Bullseye's and ED's, anyone have and opinion on the subject? I did some searching and found some info on the Bullseye's but not so much ED's anything really w/ ED and wastegate was about there external setup. The actuator will be going on a BD Special that will be over a ED s480.
 
Bullseye you have to have their oil drain and ED can use stock. I have a ED on my 62 and haven't had any issues with it.
 
on a 3rd gen in the stock location, the Bullseye will work... it will also work in a twin config.

but the E.D. works in any config :)

and the guys at E.D. are great, so I buy all my wastegate actuators from them :D
 
You can get one at Stainlessdiesel.com it should be the same one as Bullseye but cheaper. Works great I have one on my top turbo.
 
Forrest Nearing said:
on a 3rd gen in the stock location, the Bullseye will work... it will also work in a twin config.

but the E.D. works in any config :)

and the guys at E.D. are great, so I buy all my wastegate actuators from them :D
Click to expand...

ditto...

It would be hard for me not to buy my turbo-related parts from E.D.
 
You must log in or register to reply here.
Back
Top