Waterman fittings

Penni

New member
Joined
Oct 5, 2010
Messages
1,351
Just bought a waterman pump and check valves etc etc... what size AN fittings did you guys go with? I need to know so I can order all the fittings before I get home from work next week...

Sent from my SM-G930V using Tapatalk
 
What he said... And assuming you are using this on a p pump application. Split off to (2) 5/8 or #10 lines to feed the injection pump.
 
I run -10 the whole way. -10 dual feeding the injection pump and all returns are -6.

Sent from my VS980 4G using Tapatalk
 
I thought mine were radius -12 for inlet and outlet. Not sure since I have not taken it apart for 4+ years and it originally came from Haisley.
 
#12 top port to fuel filter (out)
#6 Side port to high speed check valve/return to tank
#12 bottom port suction from fuel tank (in)

I can text you pics/schematic if you give me a number. not sure how to upload them.
 
#12 top port to fuel filter (out)

#6 Side port to high speed check valve/return to tank

#12 bottom port suction from fuel tank (in)



I can text you pics/schematic if you give me a number. not sure how to upload them.



That's what the inside of the waterman is? Because I am running 10 line.
 
That's what the inside of the waterman is? Because I am running 10 line.



Should be an to straight cut oring fitting.. the inlet and outlets are -12... return -6. Im guessing that means you have a -12/-10 reducer on yours...
 
#12 top port to fuel filter (out)
#6 Side port to high speed check valve/return to tank
#12 bottom port suction from fuel tank (in)

I can text you pics/schematic if you give me a number. not sure how to upload them.

Sent you a PM

Sent from my SM-G930V using Tapatalk
 
Back
Top