Weight box rollers

[AdamA55]

I need rollers for my weight box, must be 6" around, anyone have any or know where I can get some & not have to build them, running out of time

 

[Red_Rattler]

6" well casing capped off on the ends is what I'm doing

 

[cummins03]

A buddy got me rollers off a coal belt in a power plant. They worked good

 

[bubba2400]

Find end rollers from a conveyor belt. Usually 6-8" range. Find a gravel pit, they probably have some. Or pipe with end caps and bearings in the end caps, that is how we make them.

 

[AdamA55]

Find end rollers from a conveyor belt. Usually 6-8" range. Find a gravel pit, they probably have some. Or pipe with end caps and bearings in the end caps, that is how we make them.

Can you send a pic or make me some

 

[amongold]

Performance pros sells them.

 

[billybob7]

Roll off wheels from a trash roll off

 

[dazework]

Roll off wheels from a trash roll off

That's what I was thinking, or just get a piece of tubing and weld plates on each side.

 

[billybob7]

roll off wheels work the best and i think they come with plates to weld on to your box

 

[marinesniper7mm]

Would anyone know where to get the stainless steal ones that are about 6in long x 6in dia?

 

[cummin try me]

http://roll-offparts.com/index.php?route=product/category&path=125

 

[bubba2400]

I don't have any pictures of just the rollers but here are some 8" ones I made for this weight box.

http://www.competitiondiesel.com/forums/attachment.php?attachmentid=42557&d=1365888649

http://www.competitiondiesel.com/forums/attachment.php?attachmentid=42559&d=1365888649