went to the track again

[Power Stroke]

new best on tune 1.84 60ft 8.729 @ 76.80 1/8th 13.845 @ 95.64
new bests on nitrous best mphs 1.871 60ft 8.152 @ 85.37 1/8th 12.750 @ 106.73
best ETs 1.73 60ft 8.043 @ 84.44 1/8th 12.686 @ 105.83

still getting it dialed in and learning how to launch it on the juice, fricken power comes on so hard its almost impossible not to spin the tires. this is on stock injectors stock turbo stock head bolts/gaskets stock trans. only mods intake exhaust egr delete email tune and NX dry shot. next mod: tuned FICM.

http://s499.photobucket.com/albums/rr355/Mikeric03/?action=view&current=P1010617-1.flv

 

[03f250stroke]

what are you launching at?

boost? rpm?

 

[nummit]

Good runs, congrats

 

[haloman]

Congrats on the times

 

[Power Stroke]

i dont leave on a lot of boost or at WOT. i think the last pass i left at 15psi and nailed it about 10ft out. probably about 2000rpms.

thanks guys

 

[bones]

nice passes...

 

[03f250stroke]

last pass down the track i left at 1700 rpms..right to wot and spraying nitrous

what are you using to control your nitrous, spraying it, what is your setup?

 

[Power Stroke]

micro switch under the go pedal, NX dry kit .093 jet 15lb bottle dynotune heater nx gauge. no progressive controller.