What engine mounts you guys using to run a new CR engine into a 2nd gen truck?

[Mike Holmen]

I have a few 5.9L/6.7L common rail engines and I want to install them into a 2nd gen truck. I have tried the 2nd gen engine mounts on a common rail and the engine doesn't even come close to fitting. Going to buy a set of 6.7L mounts just to see if it works.

 

[5150ram]

Are you bolting the mount to the correct set of holes? I have a 07 5.9 block in a 2002 and it fits like the stock engine.

 

[Mike Holmen]

I tried a 03 HO CR engine, with 2nd gen VP motor mounts. One side didn't line up to well. Which motor mount did you use? I'm going to run a 6.7L engine in my 02 truck.:rockwoot:

 

[5150ram]

They might be my 12v mounts. I cant remember I'll try to look this weekend.

 

[YOUNG GUNS15]

This would be helpful info. we want to put a 12 vavle in a 05 truck. ive been told i need to build my own motor mounts for this swap.