What is everyone making with a VP?

8UPRACIN

8UPRACIN

New member
Joined
Dec 17, 2008
Messages
236
Hit the rollers today and made 456hp and 916ft/lbs with everything below. What are you guys making? Looking to compare and wanting more power.
Chris
 
finally got the gf's truck tuned a little,
6.5's , ps 62, comp
523/980 ??
smarty hurt us on hp.
 
Nice. I am wanting some 250hp injectors now and a bigger top turbo. Gotta break 500hp here by the end of summer
 
4th gear:
620 hp- fuel
678 hp- small shot of nitrous
 
499 Hp with Jammer 5's, Adrenaline, and stock 2005 turbo retrofit.
 
Nice numbers everyone. Needing to do some more tuning here looks like. What setting on the box were you running? I ran level 6 and sub level 4.
 
monster pumped 650hp 1240tq. Edge drag set on setting 3.
 
640 on a SO pump, and fuel only, I don't remember the torque. I am thinking of going to twins and get it a little higher.
 
some of the guys at ts should be able to tell the hp ect but John gilbert has a stock vp still on his truck and put down a great number and his truck runs 11.8's as in his fastest so far 11.85 and he ran 11.87's at 114 tonight at test and tune. I would post the hp but can't remember his numbers so won't post don't want to get it wrong.
 
850hp has been done on #2

i have a complete new set-up going in and will have dyno #'s in about a month or so, and were hoping to see something good :evil
 
i just did 528/983 with a so pump and injectors only, and 522/928 with a comp and sticks
 
8UPRACIN said:
Hit the rollers today and made 456hp and 916ft/lbs with everything below. What are you guys making? Looking to compare and wanting more power.
Chris
Click to expand...

What twins are you running? Who's injectors? What gear did you dyno in? What brand nd model dyno were you on?

With your setup I would have expected to see at least 500 RWHP an actually closer to 550. I used to set trucks up with Mach 4's (150 HP injectors), Edge Drag Comp, and a 62mm turbo and would consistently produce 500-525.

Doug
 
Jetpilot said:
What twins are you running? Who's injectors? What gear did you dyno in? What brand nd model dyno were you on?

With your setup I would have expected to see at least 500 RWHP an actually closer to 550. I used to set trucks up with Mach 4's (150 HP injectors), Edge Drag Comp, and a 62mm turbo and would consistently produce 500-525.

Doug
Click to expand...

I agree, I did 436hp/901tq with an HX40, 60hp inj, HRVP, TST PM3 and a FASS 150. Depending on your twins you should be mid 500's for sure...
 
8UPRACIN said:
Hit the rollers today and made 456hp and 916ft/lbs with everything below. What are you guys making? Looking to compare and wanting more power.
Chris
Click to expand...

? something is wrong. i did 505hp with drag comp, M4's(150hp) and a 62/65/14. u have way more stuff going on for power than i do. iwould guess ur set up would be closer to 575-600.
 
You must log in or register to reply here.
Back
Top