WPDiesel
New member
- Joined
- Mar 25, 2011
- Messages
- 501
So if y’all don’t know the truck It was built for UCEeCeE qualifier in 2018.. was a 60,000 mile 3500 drw truck. We did all the fab work and transmission... upgrades this winter as we took ownership from the original owner we built it for...
48re with captured clutch design TC (basically taking a 47/48 to th400 lockup level)
Has a 3 speed 727 valve body with 4 external solenoids that operate: Dump, lock up, OD, trans brake
The truck is going small tire as well (28x10.5)
And finally putting a nice interior in! I’ll try to post more as we go the motor is a sleeved 6.7 down to a .020 5.9 wet block.. F1 will have the injector job for the fuel side and we plan to run someone’s 12mm cp3
48re with captured clutch design TC (basically taking a 47/48 to th400 lockup level)
Has a 3 speed 727 valve body with 4 external solenoids that operate: Dump, lock up, OD, trans brake
The truck is going small tire as well (28x10.5)
And finally putting a nice interior in! I’ll try to post more as we go the motor is a sleeved 6.7 down to a .020 5.9 wet block.. F1 will have the injector job for the fuel side and we plan to run someone’s 12mm cp3