what does it mean to have the governing springs "loose"?
I'm drastically changing my setup and just curious if anyone is running something comparable to give me a guesstimate.
S467 67/83/.90 T4
5x18
188/220
165LB springs
Hamilton extreme duty pushrods
180 pump, laser cuts, Mack plug, no plate, .093 holders and lines, 5500gsk
Still deciding between Steed or Stainless manifold and what gate to run
I'm hoping for 750ish
Sent from my paperweight
That thing is gonna smoke like a freight train
Laser cuts = no bueno... Especially with 5x.018's IMO
It won't smoke horrible with 12mm pump, unless lasers are really that bad. Mine has 181, comp cuts, stock holders, 5x.016, and cleans up almost completely.
1994 2500- 160hp pump, mack rack, 22* timing, 5x14 sac injectors, 62/74/14, airdog II dual feed, homemade 191 dv's. 640-1335 fuel only 646-1364 on winshield washer fluid
Nice numbers! Especially with 5x.012.
Thank you! I've been told the DDP 3's can achieve 700hp. With some more air I believe it is possible... Going to be a while before I can afford the turbos I want. :nail:
Dynoed the truck Saturday and pretty happy with the numbers. Here's the truck:
98 QCSB
180 pump, barrels racked and balanced with 024 dv's, 5K springs, Timed at 26*
DDP 3s 5x.012
Head ported by me, 60lb springs, Fire Ringed, and ARP Studs
HX-40/HT-60
652hp and 1320 ft lbs
This is with my plate and about an 1/8" from being full forward. I think the only step forward is new chargers. Truck runs smooth and can be driven virtually smoke free.
Dynoed the truck Saturday and pretty happy with the numbers. Here's the truck:
98 QCSB
180 pump, barrels racked and balanced with 024 dv's, 5K springs, Timed at 26*
DDP 3s 5x.012
Head ported by me, 60lb springs, Fire Ringed, and ARP Studs
HX-40/HT-60
652hp and 1320 ft lbs
This is with my plate and about an 1/8" from being full forward. I think the only step forward is new chargers. Truck runs smooth and can be driven virtually smoke free.
Very Nice !! Damn near spot on what my 98 did with a 35/40 nand HT60. I really liked that setup. The HT60 is a damn good charger.