skilletky
i love lamp
- Joined
- Feb 24, 2009
- Messages
- 342
Was just pulling into my driveway and tapped the throttle to get up the hill. When I pushed in the clutch, the Rpms went up to 2000. Shut the truck off and checked all my throttle linkages and all is good. Started the truck back up and it idled fine. I hardly even tapped the throttle and it went right to 2000 Rpms. If I lightly push the throttle lever towards idle, it will idle normal, but the second I tap it to idle up, back to 2000. It will rev up fine but won't go below 2000. It's a 215 pump, pac brake 4k springs. Should I look at gov Springs, or could a plunger/ rack be starting to stick. Not sure on milage of the pump.