Mine takes almost 5 gallons , that's draining the converter also.
Mine takes almost 5 gallons , that's draining the converter also.
x2. My 47re with a MagHytec takes just under five, so I typically just buy a 5gal bucket. It's cheaper that way.
So, with all of that stated, a brand new converter and 48RE with Mag Hytec pan has an initial fill of about 5 gallons. Very good to know.
How are you draining the converter? Pull the trans?
How are you draining the converter? Pull the trans?
1/8" NPT plug on the aftermarket converters.
Can you access that from the peak slot on the bottom of the bell-housing? I'll have to go back and look at pictures of my TC because I don't remember seeing that plug.
Yes, take off the cover and rotate until it is accessible...if you have a plug.
I don't drain it unless I'm pulling the trans. I swap trans fluid once a year for good measure with a new filter. I assume/hope the dilution of the dirty fluid with new/clean fluid is enough.
Can you access that from the peak slot on the bottom of the bell-housing? I'll have to go back and look at pictures of my TC because I don't remember seeing that plug.