IC-Smoke
Oh SNAP!
- Joined
- Oct 23, 2006
- Messages
- 1,144
Intake Horn 94-02
This intake was made for my neighbor on his 2003 but we couldnt get the IC boot to pull up far enough to be comfortable with how it was(see pics). It is fabbed after my 2nd gen one so it will fit a 98.5-02 for sure and should fit the 94-98 as well. I dont have a 12V to put it on to make certain. 2 1/8" tapped ports on the back. you will need 2 more bolts that match the shorter ones on the factory intake horn. and a small bolt/nut for the oil fill as the tab for it is NOT tapped.
$150 shipped to you
Look in the lower righthand corner you can see the IC boot where it goes on the pipe... His 2003 has a rib in the pipe so we coudlnt slide it up and clamp back down on it to make it work.
Ian
This intake was made for my neighbor on his 2003 but we couldnt get the IC boot to pull up far enough to be comfortable with how it was(see pics). It is fabbed after my 2nd gen one so it will fit a 98.5-02 for sure and should fit the 94-98 as well. I dont have a 12V to put it on to make certain. 2 1/8" tapped ports on the back. you will need 2 more bolts that match the shorter ones on the factory intake horn. and a small bolt/nut for the oil fill as the tab for it is NOT tapped.
$150 shipped to you
Look in the lower righthand corner you can see the IC boot where it goes on the pipe... His 2003 has a rib in the pipe so we coudlnt slide it up and clamp back down on it to make it work.
Ian