Search results

Not sure if it's in your site, or my laptop, or my Alltel wireless, but I couldn't get the checkout to work. It allowed me to login, put items in the shopping cart, but no more. I'm only looking for a 2095 rack plug, the inner spring to convert my 3k to 4k, and a set of 12 60lb valvesprings...

Buddy of mine sold his SPS 62, and needs a turbo to run in the meantime until he can get his new one. For now, he'd just like to throw an HX40 on to get to and from work. Nothing extraordinary, just needs the truck to run.

I'm planning on upgrading to some 5 x .012 injectors, rack plug, 4k gsk, and some good pump tuning, in my 160 pump. I'm not happy with the DDP's anymore, gonna get in touch with Smokem and try some of his. Anyways, my little B1 Kwikspool didn't very well like smaller injectors on my old 97...

Ok guys, I've got an odd situation with my 4wd. If I start the truck, and see that my dash light for 4wd is illuminated, then shift the transfer case, my 4wd works perfectly. If I have been driving the truck, and try to shift into 4wd, not matter what, it won't work. The front axle won't...

Got my 95 back last night. This truck always had an issue or two in the tranny, but seems to have gotten much worse. When I say delayed shift into overdrive, we're talking 30 full minutes of driving, with the truck being warmed up in neutral for approx 10 minutes. With the motor fully up to...

My head was milled .010 when I got it o-ringed, and valves were recessed .010 to compensate. I will be running either New Era 435's or DDP 2's(not sure which charger(s) I'm going to run now). 215 pump currently set at 5.4 mm plunger lift, 15* on stock motor. With the head machining and the...

Need a stock turbo and exhaust off 98.5-02 CTD. HX35, downpipe, muffler, tailpipe. Basically everything from the manifold to the back of the truck. Would like it to be within 100 miles of Plover, WI, as I will pick everything up. Would also like everything to be bolt-on ready, no junk turbo...

Will they work? Will it hurt performance substantially? Anything detrimental to the pump at all? Buddy of mine sent his 215's in for cores, and needs to drive the truck for a couple of days. I have a set of 160's for him to use if needbe. In a pinch, and hoping this will get him by.

Hi all, I've been looking around, and have been finding some really good deals on 03-04 trucks, most with 100-125k miles. I have heard that the early CR motors got excellent fuel economy, both stock and with tuners. Any truth to that statement? How do the stock autos hold up to a mild tuner...

I'm slowly getting the parts together for my truck, and am looking at taking the pump off and sending it out. What kind of tuning should I do so that it'll make ~550 to the wheels. I picked up some New Era 435's for injectors, a 4K GSK, and was looking at some taper cut delivery valves from...

Looking for a 64mm turbo, with the 71mm LDP turbine, and 14 cm housing. Can be II, HTT... A set of EDM 435's, I have my stock 215's for core yet. A set of 12 mm studs, and a Fluidampr with drill pin kit and tach sensor kit. All for my 97 12 valve. The credit card is ready, let me know a...

After reinstalling my head and adjusted my valves, or should I say mis-adjusted the valves, and bending all 12 pushrods, my motor needs to come apart. #3 took the worst hit, and it left some nice gouges in the piston. Head is getting checked out, and will get new valves if necessary. I'm...

Anyone running one of these at all? I've been contemplating upgrading the hotside on my B-1 to the LDP 71mm wheel, and replace my 12 cm cracked housing. I want it to breathe. I figure that the 62 mm compressor is enough to keep 500+ hp cool, so I want to make sure the exhaust side isn't choking...

What kind of deals can the vendors here give me? I'm all for supporting the cause, and would rather give money to a supporter on here. Anyways, everything is for my 97. I'm looking for 12mm studs, a .010 over gasket, and a set of stock pushrods. ESN-56364835 Let me know what kind of...

Put in a 13" Valair Con OFE last November, and it's been a great setup for me. But the shifting/getting into gear has gotten progressively worse lately. The tranny seems to be in great shape, as I can simply float the gears if clutching causes a problem. Is it possible that this setup...

Anyone running this clutch? With a 6 speed? I'm hoping to pick up my new truck this week, 01.5 HO, and am looking to mod it immediately and be ready for this summer. Two pulls a year, once or twice at the drag strip(have always wanted to drag my trucks), daily driving to and from work, and...

Hi all, new to the PSD's. Truck in question will be a 99.5-01, with a 6 speed, 4x4. I'm still looking for the truck, so I can't say the definate year, but wanting to get an idea of what I need for mods ahead of time. Anyways, what all will be needed to put 400 to the ground? What kind of...

My 95 is in dire need of some tranny work, and I don't want to put it off. Mods to the motor will include: 215 injectors, #6 plate, 15* timing, 3k GSK, and a 35/40 hybrid. Truck will be used as a daily driver, no towing at all. I need something better than stock, but not exactly race quality...

My recently retired mother is looking to purchase a travel trailer and visit the country. She bought her 02 brand new, and has kept it up very well. It has just over 100k on the clock, and runs like a champ, but could always use that little extra kick. Her main concern is the mileage. She...

After installing my DDP's and #6 plate in my 95, my tc now slips in OD if I get on it hard. I am looking at a simple shift kit/valve body workover and single disc convertor if I can get away with it. Intentions for the truck are daily driver, towing at roughly 17,500 gross with a gooseneck, and...