RonA
Active member
- Joined
- Feb 26, 2008
- Messages
- 11,068
I'm currently running SDX 300bar 7X10's in my 02. Not liking them at all, probably the worst value of 2hrs spent working on the truck ever. I came from 6X13's SAC's and going back to them soon. I have another set of SDX 300 bar 7X13's I guess that I should try out.
I'm still not sure of which way to go with my old truck when I build the new engine for the truck. So many choices these days.:hehe:
Every 12V that I've built has run decent and fuel good when tuned. Same goes for the current VP, you just need the right parts. Best power I've made was 673rwhp on VP back in 05
I've had good luck with my 7 x .013's, but I just got a set of 6 x .019's back from Exergy to try. I didn't increase the fueling when i went to the 6.7 and it's running really nice, but I can tell by the smoke and egts that it could use some more fuel. I worry about the tighter angled 6 holes being alot smokier