thanks guys
what kind of moded cp3 do you guys suggest for an LB7 I'm thinkin of goin with a the garret upgrade but was wondering if i should go bigger a bigger one like a gt40 so that I can use it to build bigger power in the long run if that makes sence
Thanks again
I just went back and read your post. I over looked it but you will also want to budget a transmission upgrade.
Says in his sig "Built tranny"... Stock CP3 should not have any trouble keeping up with bigger Nozzles, I run 40% tips with a lift pump and stock CP3. I would suggest Twins, and a set of 30-40% tips, That will put you in bent rod teritory..:rockwoot:
I looked right over it in his signature, my bad.
Also is your rail pressure keeping up with commanded with 40% nozzles? What tuning are you running? The only reason I ask is because the stock cp3 with lift pump couldn't keep up with 40% nozzles in our pulling truck a few years ago. Ended up going to twins and that solved it.
Thanks alot guys I was thinking of twin fuelers but i think i might try with 40% over injectors what turbo do you suggest a gt40 or something along those lines.
And also what injector tips do you suggest industrial or someone elses.
Thanks agian
the lift kit idea is gone
I WANNA GO FAST lol
Thanks alot guys I was thinking of twin fuelers but i think i might try with 40% over injectors what turbo do you suggest a gt40 or something along those lines.
And also what injector tips do you suggest industrial or someone elses.
Thanks agian
the lift kit idea is gone
I WANNA GO FAST lol