'06 Built Cummins CR engine part out

[FDS]

I am down to mostly just the engine for the part out. Here is what I have for it being pieces out:

Carrillo Rods: $2,100
Monotherm pistons(.020) - $2,500
Haisley cast cam - $500
Hamilton pushrods - $250
Port and polished head(shelf milled off/103# valve springs/titanium keepers -$2,500 head is o-ringed
ZZfab side draft - $900
Electric water pump - $150
Crank -$500
Block - $750
Kennys 5/8 Girdle - $900
ARP 625 Head studs - $750
Fuel rail and all lines - $200
CP3 - $200
Alternator $100
Valve Cover - $50
Flex plate $100
Front housing and cover $150
Trans adapter - $150

 

[Kronk]

http://www.competitiondiesel.com/forums/showpost.php?p=2509621&postcount=74

More profitable parting it out = $12,750 op:

 

[Stockguy61]

Send pics of rail lines and cp3 to 2625151509. Is the co3 stock?

 

[dangerous06]

I'll take the 625's and the valve cover with bolts I hope!
text me 858-395-8289 Andy

 

[adam_1983]

Who did the head work? Does the zzfab have provisions for a 6.7 rail?

Sent from my SM-N920V using Tapatalk

 

[FDS]

Stockguy61 and Dangerous06 I will get ahold of you guys in the morning.

The head was done by Nyes performance in Indiana. I will have to check regarding the 6.7 rail provisions on the intake.

 

[Stockguy61]

Ok sounds good

 

[white 06]

Price on connecting rods push rods and vale cover. 828-925-8819 call or text what kind of rocker arms on it

 

[augerdickmining]

I'll take the push rods if you still have them.

 

[RandomHero]

Sent you a PM.

 

[FDS]

Adam 1983 - the intake will accept the 6.7 rail.

 

[b.scheid]

interested in pushrods papal ready 3203333717 text for faster response

 

[Suzuki450ltr]

Still have the cam?

 

[FDS]

Push rods are sold pending payment.

Yes I do still have the cam.

 

[augerdickmining]

Money sent on pushrods.

 

[FDS]

Head studs - Sold
Valve cover - Sold
Push rods - Sold
Injectors - Sold pending payment

 

[FDS]

Water pump - Sold

 

[smoke~black16v]

Do you still have the cp3? Miles on it? What are the specs on the can?

 

[FDS]

Yes I do. I don't know the mileage, but I would say 100,000+
It is the large intermediate cam. It says it's a 234/254

 

[FDS]

Updated pricing:

Carrillo Rods: $2,100
Monotherm pistons(.020) - $2,200
Haisley cast cam - $400 with gear and bronze thrust plate
Hamilton pushrods - SOLD
Port and polished head(shelf milled off/103# valve springs/titanium keepers -$2,500 head is o-ringed
ZZfab side draft - $900
Electric water pump - SOLD
Crank -$500
Block - $750. Bored .020 over
Kennys 5/8 Girdle - $900 with main studs
ARP 625 Head studs - SOLD
Fuel rail and all lines - $150
CP3 - $200
Alternator $100
Valve Cover - $50
Flex plate $100 SFI with ARP bolts
Front housing and cover $150
Trans adapter - $150