'96 5.9L 12v IH stamped 14mm main 2.6 engine. Rotating assembly blue printed and balanced.
All machine work and assembly done by Drew Pumphrey (D&J Precision Machine)
Std bore
Interstate McBee rod and main bearings.
Ross forged pistons. Bowls and reliefs by D&J. Total seal rings
Cummins 12v rods new pin bushings, big ends honed, oil hole in top of rod. Arp rod bolts.
Stock crank checked polished and balanced. Gear welded on. 14mm Arp main studs. Fluid damper with timing tape.
Stainless diesel 12v T-6 exhaust manifold.
Cummins 12v head. Intake removed, drilled, and tapped for joker fab intake. Injector bores reamed for 9mm tips.Decked and O-ringed. Marine 2 into 1 breather valve cover. 4 other stock VC's.
Performance valve job. Stock valves. Stock rockers.
Hamilton 165# springs and retainers/keepers.
7/16 push rods.
New cummins 24v stock tappets
Hamilton 220/240 .360" - .360" Billet steel cam. Have spec sheet with it.
Block is line bored for cam bushings.
Stock cam gear
JD's Adjustable Pump gear
North East Diesel 13mm auto gov P-Pump. 5500rpm. 550-950cc. Have spec sheet with it. Dual fed with (2) -10 lines.
Scheid DT Injectors. 5x.022 145* 9mm tips. Dual feed bodies.
Stock vacuum pump with drive hub welded on.
Jegs electric water pump.
Billet aluminum freeze plugs.
JD's billet front cover and tappet cover with breathers.
$20,000
Bryan
(330)-503-19eight nine.
All machine work and assembly done by Drew Pumphrey (D&J Precision Machine)
Std bore
Interstate McBee rod and main bearings.
Ross forged pistons. Bowls and reliefs by D&J. Total seal rings
Cummins 12v rods new pin bushings, big ends honed, oil hole in top of rod. Arp rod bolts.
Stock crank checked polished and balanced. Gear welded on. 14mm Arp main studs. Fluid damper with timing tape.
Stainless diesel 12v T-6 exhaust manifold.
Cummins 12v head. Intake removed, drilled, and tapped for joker fab intake. Injector bores reamed for 9mm tips.Decked and O-ringed. Marine 2 into 1 breather valve cover. 4 other stock VC's.
Performance valve job. Stock valves. Stock rockers.
Hamilton 165# springs and retainers/keepers.
7/16 push rods.
New cummins 24v stock tappets
Hamilton 220/240 .360" - .360" Billet steel cam. Have spec sheet with it.
Block is line bored for cam bushings.
Stock cam gear
JD's Adjustable Pump gear
North East Diesel 13mm auto gov P-Pump. 5500rpm. 550-950cc. Have spec sheet with it. Dual fed with (2) -10 lines.
Scheid DT Injectors. 5x.022 145* 9mm tips. Dual feed bodies.
Stock vacuum pump with drive hub welded on.
Jegs electric water pump.
Billet aluminum freeze plugs.
JD's billet front cover and tappet cover with breathers.
$20,000
Bryan
(330)-503-19eight nine.