Fairchildbr
New member
- Joined
- Aug 11, 2014
- Messages
- 67
2 bare 12v valve heads - 200 ea
1 complete 12v head, condition unknown- $100
1 international casting 14mm main block and crank- $700
2000 VP truck ecm, pcm, harness- $800
12v block- $200
12v crank- $150
1 12v with spun rod bearing. Has studded bottom end and arp rod bolts. Crank should be salvageable. Rods are fine. no pistons $400
1 set of marine bowl pistons with .125 fly cuts Valve reliefs cut incorrectly by machine shop. Has extra valve pocket. Picture attached $350
BNIB 12mm arp 625 head studs for 12v $900
BNIB 14mm arp head studs for 12v $400
14mm industrial injection gorilla girdle kit. Studs were installed for mock up everything else is new $800
2 sets hamilton 165lb valve springs 1 set installed but not used 1 set used. $300ea
1 set 150lb valve springs w retainers installed but unused $175
1 set industrial injection 150lb valve springs no locks or retainers $100
New Hamilton 1.75 valves for 12v head. $350
Original Hamilton head 1.75 intake valve 1.87 exhaust valve. Hamilton 185# dual valve springs and haisley valves. Exhaust side is ported by haisley machine. $3200
12v Steed speed manifold angled and tapped in each cylinder for EGT probes. $550
Also have odds and ends other things if you dont see it just ask. Chances are I have it.
Can ship on buyers dime.
More pictures of specific parts upon request
Text or call is best dont get on here much anymore
610nine zero five 2833
Brandon
1 complete 12v head, condition unknown- $100
1 international casting 14mm main block and crank- $700
2000 VP truck ecm, pcm, harness- $800
12v block- $200
12v crank- $150
1 12v with spun rod bearing. Has studded bottom end and arp rod bolts. Crank should be salvageable. Rods are fine. no pistons $400
1 set of marine bowl pistons with .125 fly cuts Valve reliefs cut incorrectly by machine shop. Has extra valve pocket. Picture attached $350
BNIB 12mm arp 625 head studs for 12v $900
BNIB 14mm arp head studs for 12v $400
14mm industrial injection gorilla girdle kit. Studs were installed for mock up everything else is new $800
2 sets hamilton 165lb valve springs 1 set installed but not used 1 set used. $300ea
1 set 150lb valve springs w retainers installed but unused $175
1 set industrial injection 150lb valve springs no locks or retainers $100
New Hamilton 1.75 valves for 12v head. $350
Original Hamilton head 1.75 intake valve 1.87 exhaust valve. Hamilton 185# dual valve springs and haisley valves. Exhaust side is ported by haisley machine. $3200
12v Steed speed manifold angled and tapped in each cylinder for EGT probes. $550
Also have odds and ends other things if you dont see it just ask. Chances are I have it.
Can ship on buyers dime.
More pictures of specific parts upon request
Text or call is best dont get on here much anymore
610nine zero five 2833
Brandon
