12v crank in a 06 cr

[Toby Cashion]

06 dodge spun a rod bearing on #5, took the crank to the machine shop to get turned and they discovered a crack on one of the mains. I have two 12v cranks that just need a little work. Will they work? I know I have to press the gear off and drill for the pin in the front. Thanks

 

[LReiff]

The crank will work.

 

[Smokem]

If it is a manual you will have to machine down the OD of the hub on the flywheel.

 

[LReiff]

If it is a manual you will have to machine down the OD of the hub on the flywheel.

Not sure where you get that. We've swapped flywheels from CR motors to 12v motors and they fit perfect.

 

[Smokem]

I should have specified that the dual mass flywheel will not work with the 12v crank without being modified.