12V injectors

zstroken

zstroken

For $$$ your name here
Joined
Sep 27, 2006
Messages
23,151
What is the best injector for pulling? I am contemplating getting some different injectors.

Dynomite Diesel Competition series?
II 10 holes, dragon flows, supers?
F1 diesel?
Columbus diesel?
Or just get a set of EDM's?

3.0 charger, 13mm pump
What size injectors, if just going with the EDM's?
 
Can you use water in your class? Do you use water?

A good 13mm, a sinlee 3.0 turbo, and a set of big stix could melt schtuff fast.
 
I think the better question is what are the best injectors for your set up. I think it's a bummer that water/meth is out because that limits the options for ya.
Are you convinced that you need more fuel? Is your smoke cleaning up?
Maybe volume can be had elsewhere? That pump should be able to supply more than enough?
Why not just open up your existing injectors a little if need be?
 
Those are all options, just curious what peoples take is. I was hoping that people would take into account my setup.
 
estrogen said:
Those are all options, just curious what peoples take is. I was hoping that people would take into account my setup.
Click to expand...

I watched the video you posted in the other thread you have. Looks like fuel to spare, but I understand the waste gate issue, and timing contributed.
I'm sorry I can't name a best injector for pulling. I don't know if there is one really.
Do you have any vids of your truck putting it down? You know..... without issue.? I'd like to see what your chimneys are doing when the sled catches you? A day time clip would be great.
Nice truck by the way:Cheer:
 
$&^%% said:
I watched the video you posted in the other thread you have. Looks like fuel to spare, but I understand the waste gate issue, and timing contributed.
I'm sorry I can't name a best injector for pulling. I don't know if there is one really.
Do you have any vids of your truck putting it down? You know..... without issue.? I'd like to see what your chimneys are doing when the sled catches you? A day time clip would be great.
Nice truck by the way:Cheer:
Click to expand...

That was the first hook on this setup. The reason I say 2 hooks on the injectors is there is a sled pull tonight, I plan on running them in.

What is the deal with the estrogen comment? LOL
 
zstroken said:
What is the best injector for pulling? I am contemplating getting some different injectors.

Dynomite Diesel Competition series?
II 10 holes, dragon flows, supers?
F1 diesel?
Columbus diesel?
Or just get a set of EDM's?

3.0 charger, 13mm pump
What size injectors, if just going with the EDM's?
Click to expand...



II dragon flows. I believe they are 10 holes. I havent hooked with them yet, but they sure fuel hard
 
I see your signature says billet rods, whose are they?

What other injectors have you ran? What kind of RPM you seeing going down the track?
 
Don, can you give some specifics on the 12V injectors you would make, as well as cost.
 
zstroken said:
I see your signature says billet rods, whose are they?

What other injectors have you ran? What kind of RPM you seeing going down the track?
Click to expand...



they are haisley rods. I used to have 370s now these. I havent pulled yet, but on the street ive ran it to 4400 or so and it was still pulling . I just got scared:hehe:
 
if your pouring black smoke already i would look into improving other areas besides injectors unless your running 370's.
 
smokin1997 said:
they are haisley rods. I used to have 370s now these. I havent pulled yet, but on the street ive ran it to 4400 or so and it was still pulling . I just got scared:hehe:
Click to expand...

I doubt they billet rods, unless you have $500+ each in them. They are probably stressed relieved rods.
 
zstroken

the ones I pm'd you about are the right pattern, the ones I am running now are the wrong ones, thus that is why I ordered new ones. Just to clear that up.
 
You must log in or register to reply here.
Back
Top