12v performance and stock parts

Kroner96

New member
Joined
Nov 27, 2007
Messages
483
Upgraded the truck a little and have some leftover parts.
Fass 95gph, this is just the pump $150
6 pistons with the bowls opened and flycuts $450
H2 cam $300
Ported exhaust manifold with a Tial wastegate welded in $200
I also have the stock head, cam, and injection lines if anyone is interested
 
Wastegate is 50mm and has a t-4 adapter with it, the pistons are 15-1 compression with .185 flycuts. All performance parts were checked out at HMR.
 
Last edited:
Wastegate is 50mm and has a t-4 adapter with it, the pistons are 15-1 compression with .185 flycuts. All performance parts were checked out at HMR.

Sorry guys I measured the valve and not the hole on the wastegate, it is only a 38mm gate. It opens at 12-15psi with out the lines, but comes with the regulator. I was opening it past 50psi but im not sure where since my gauge only went to 50. All pms returned
 
Where were these pistons 4 months ago?? Man I would have bought those in a heart beat!
 
Still have the pistons and the cam...make offer
I also have a cummins girdle just sitting around paid $220 then couldnt use it, make offer
 
Back
Top