Hey guys, i couldn't get much information on this elsewhere. I am swapping a spicer eso66-7b into my 1996 dodge ram with a 12v. I am looking for a good dual disc setup to hold in the neighborhood of 1100 ft lbs. I would also like it to be a standard off the shelf clutch rather than a performance series clutch. I'm not trying to spend an arm and a leg on the clutch. I've been looking at some lipe clutches that hold about 1800 ft lbs, and they are fairly cheap. Part no. RC1714718X. All i can find is clutches rated for less than the power i plan to build or clutches designed for pot style flywheels. And then there are those lipes i mentioned, but 1800 ft lbs seems like a bit much. Thank you all in advance for your input.
14" dual disc clutch for trans swap
- Thread starter xavier23
- Start date
9724VF350
Tractor Guy
- Joined
- Mar 2, 2010
- Messages
- 2,784
You are looking for a stamped steel dual disc that comes with a spacer ring that runs on a flat flywheel like the one on the bottom left of this link. South Bend Clutch Catalog - Semi-truck Clutch Kits
Peter
Peter