Extended Power
New member
- Joined
- May 19, 2006
- Messages
- 2,978
Dan, when I first install my FASS, it had 45 psi. (I PM'd you about this long time ago.)
You sent a new spring, and fitting to get the pressure way up because I was running a Regulated return on it.
Well, it ran perfect, until I got rid of the Regulated return stuff.
I put the old fitting, and spring in, because with the other spring and fitting, the pressure was 80+ psi.
But...now I'm back down to 45 psi.
I would like to be at 60 psi, just running the FASS system.
Can I shim the old spring, or do I need a new spring, and fitting again?
Ivan
You sent a new spring, and fitting to get the pressure way up because I was running a Regulated return on it.
Well, it ran perfect, until I got rid of the Regulated return stuff.
I put the old fitting, and spring in, because with the other spring and fitting, the pressure was 80+ psi.
But...now I'm back down to 45 psi.
I would like to be at 60 psi, just running the FASS system.
Can I shim the old spring, or do I need a new spring, and fitting again?
Ivan