SCHMITTY
Not enough time
- Joined
- Jun 20, 2012
- Messages
- 1,201
I picked up a 96 auto for cheap that is bone stock. My 160 pump on my 95 has the afc mods, rack plug, 026 dv's , rotated barrels, no plate, strectched afc spring, PAC brake 4k springs.
I would like the 96 to run close to stock when I swap pumps. Aside from the racked barrels I plan on keeping my 2095 rack plug and gov springs.
Are the afc housings the same for 160/180 pumps ? Because I would like to keep the stock afc with the 96
I will pull the plate out of the 180 and put it in the 160. Are the dv's worth swapping?
It's my dd but I'm buying some 5x18s and my 351/4b setup should be done by summer. Would the stock 180 dv's be a better choice over the 026s ?
I would like the 96 to run close to stock when I swap pumps. Aside from the racked barrels I plan on keeping my 2095 rack plug and gov springs.
Are the afc housings the same for 160/180 pumps ? Because I would like to keep the stock afc with the 96
I will pull the plate out of the 180 and put it in the 160. Are the dv's worth swapping?
It's my dd but I'm buying some 5x18s and my 351/4b setup should be done by summer. Would the stock 180 dv's be a better choice over the 026s ?