16cm SS housing/71mm wheel

bsmith said:
could you try it out and see if their is any difference in spool up. i'd like to try a 16.
Click to expand...
The 16 is just a hair slower than a .8 cast iron. If you switch back and forth you can see it. Nothing to be concerned with though. It tows fine and doesn't run hotter. It just takes a tiny bit longer to get going. The 13 i had spooled a noticeable amount faster, but ran 150 degress hotter at slight throttle and 200 deg's hotter up in the hills.
 
RonA said:
The 16 is just a hair slower than a .8 cast iron. If you switch back and forth you can see it. Nothing to be concerned with though. It tows fine and doesn't run hotter. It just takes a tiny bit longer to get going. The 13 i had spooled a noticeable amount faster, but ran 150 degress hotter at slight throttle and 200 deg's hotter up in the hills.
Click to expand...


could you feel any difference in the pull up top? im guessing not since you got twins.
 
Would this work on a Industrial 62/71 or is the HTT 71 wheel a bit different?
 
You must log in or register to reply here.
Back
Top