1995 Ram single cab project 24v P pump

[jambbii]

I have too many projects, this one is going to be on the backburner for a while if it doesn't sell. Truck is pretty much disassembled right now. I was going to take th body off and brace/clear up the whole chassis. Interior is also taken apart as well.


Engine

Fresh Hone on short block (disassembled)
Brand new s475 (ED) polish comressor housing
24v head with plenum cut off, will need final machining
01 24v pistons
12v brazil rods
Brand new arp head studs
Maxspool double valve springs,titinium retainer and locks
Maxspool 2.5++ cam
JL 250 injectors
913 pump built by Turbo Auto Diesel
Aeromotive a1101 pump (diesel a1000)
New alternator, new starter, new idler pully, new water pump

Cylinder head will need valve job and oring before it can be assembled. I also do not have the injector lines or exhaust manifold.

Trans
BD converter and VB
Solid hd bands
HD Clutches
Suncoast Flexplate and Billet input
Maghitec pan
20k or less on new parts

Suspension/axel
7" skyjacker double flex
Bilstein 7100 front shocks
New axle joints
Newer passenger side hub
Fully trussed D60 front
D70 has a lockrite
New rear leaf springs
38" swampers on weld mountian crusher wheels (16x10)
Misc.

Odysee Battery
Gas truck gauges
New dash (grey)

There is probably more I am missing from this but I started repainting the truck as well. It is half in primer. There is not much body work. I want to put the truck together the right way but will not have anytime for at least another year. Let me know and I can send pics.

6000 firm.

Thanks,

Josh