2.6 puller part out

schnutsy

schnutsy

New member
Joined
Oct 12, 2011
Messages
234
Parting my pulling truck out, all parts have had about 14 hooks besides a few items. Thanks for looking
Billet Hx-60 with ED wheel and cover for 2.6 $2500 (can include guillotine for more $$)
14mm mains torqued once $175
5.9 encore block bored 40 over, drilled and tapped for 14mm mains, line bored with new cam bushings, cut for fire rings $1200
New Haisley 12v polished rods brand new have not been used, come with arp rod bolts $900
Arp 625 head studs for 98.5 and up torqued once $900
Haisley billet cam 232/252 (have to confirm specs for sure) $1000 with gear
NV4500 with extended length billet 1 3/8" input $1500
NP241 t case $500
Haisley CR to p pump billet front cover $700
6.7 crank with welded gear and doweled for fluidampr $800
Haisley stage 2 6.7 wet head cut for fire rings with a factory appearing shelf and brand new Hamilton 103ib springs $3000
13mm ag gov p pump capable of flowing 1020cc fresh from northeast diesel have a receipt of over $3000 in refresh and updates $4500
.120 stainless p pump 24v lines bre bent $450
ATS T6 manifold $400
Competition fluidampr 94-07 $300
Will update the list as I get rest of the parts together, chassis will be parted out also. Call/text 607-fivenineone-oneonetwoone for more info.
 
Stock Inconnell exhaust valves, stock intake, not oversize valves either. Seats were done and it is also tapped and has threaded plugs in all the coolant soft plug areas I'm the head.
 
Last edited:
Flex a lite fans $400
1480 rear driveshaft for rclb frame and nv4500/241 setup $450
1410 front driveshaft $350
R&M Weight box with ice box in the center and two rule pumps, two battery boxes mounted on the back side, and fuel cell mounted on back side, very nicely built piece can text pictures $1000 or $1500 with two yellow top uptima batteries and plumbing lines for w/a coolers.
Frozen boost type 18 w/a coolers have two $400 for pair or $200 a piece
Real duals with 315 bfgs with some hooks on them (not exactly sure how many) $2000
aam 11.5 rear with spool, 4:56 gears, and 300m shafts, billet adjuster, mag hytec cover, hubs for real duals, $3500
aam 9.25 front with full time eaton locker, 4:56s, mag hytec cover, stock 3rd gen wheels with 315 bfgs $2200
Parting the whole body also, truck was a southern truck so all body parts are very clean, 8ft box, doors, fenders, hood with hood stack, cab that has the cowl cut out. I'm open to offers on the body parts of the truck.
 
What's the bolt pattern and back spacing of the rear real wheels?
 
Wonder what shipping would be from New York to Missouri... I'd be very interested in those drive shafts,

Sent from my SM-G930V using Tapatalk
 
8x6.5 bolt pattern. Unsure on back spacing, about an inch from dodge frame rail on the inner dual. Probably would need a spacer for Gm since frames are a little wider.
SOLD SO FAR: front cover, trans, t case, front driveshaft, weight box, a/w coolers, trans blanket.
Also willing to ship the rear driveshaft as I still have that for sale. Thanks
 
still have the flex-a-lite fans? if so text or call me. your in box is to full 870-405-5419
 
Awesome seller, received everything and well packed, fast shipping. Answered all questions and txt , deff would do business with him again,,
 
Np Bud, still cant believe no one grabbed the whole truck, one hell of a deal with all you've got there
 
Update on what's left to help clear up the clutter of multiple posts
Billet Hx-60 with ED wheel and cover for 2.6 $2500 (can include guillotine for more $$)
14mm mains torqued once $175
Filled 5.9 encore block bored 40 over, drilled and tapped for 14mm mains, line bored with new cam bushings, cut for fire rings $1200
New Haisley 12v polished rods brand new have not been used, come with arp rod bolts $900
Arp 625 head studs for 98.5 and up torqued once $900
Haisley billet cam 232/252 (have to confirm specs for sure) $1000 with gear
6.7 crank with welded gear and doweled for fluidampr $800
Haisley stage 2 6.7 wet head cut for fire rings with a factory appearing shelf and brand new Hamilton 103ib springs $3000
13mm ag gov p pump capable of flowing 1020cc fresh from northeast diesel have a receipt of over $3000 in refresh and updates $4500
ATS T6 manifold $400
Competition fluidampr 94-07 $300
1480 rear driveshaft for rclb frame and nv4500/241 setup $450
Real duals with 315 bfgs with some hooks on them (not exactly sure how many) $2000
aam 11.5 rear with spool, 4:56 gears, and 300m shafts, billet adjuster, mag hytec cover, hubs for real duals, $3500
aam 9.25 front with full time eaton locker, 4:56s, mag hytec cover, stock 3rd gen wheels with 315 bfgs $2200
Whole roller for $10,000 with title. Rclb with adjustable hitch, solid rear, solid front. Race seat and interior gutted. Southern truck very clean no rust.
 
Bump, head sold also. Open to offers on parts! May also start parting the chassis if I see enough interest in body parts, drive line parts.
 
You must log in or register to reply here.
Top